1. When the cutting is not sharp, the cutting blade should be trimmed and cut. If continued use, overheating and overload may occur, resulting in damage to the cutting blades. And it should be noted that the cutting blade is strictly prohibited from being used for operations other than slot cutting or cutting, to avoid abnormalities caused by uneven force.
2. During the rotation of the cutting blade, it is strictly prohibited to use hands for cutting, and it is also prohibited to touch the cutting blade with hands or body. And if any abnormalities are found during the cutting process, the machine should be stopped immediately. And it should be noted that when the cutting blade is marked with the rotation direction, it should be consistent with the rotation direction of the machine tool. On the contrary, the cutting is not sharp, making it difficult to fully utilize the performance of the cutting blade.
3. If a cutting blade that does not match the workpiece being cut is used, it is prone to abnormal wear, poor sharpness, and abnormal heating. In addition, it is also important to note that when the flange is too small or has poor accuracy, it is easy to damage the cutting blade. Please improve it before using it.
4. Before installing the cutting blade into the machine, please carefully check to confirm if there are any deformations, cracks, or chippings on the cutting blade.