The grinding wheel cutting machine is mainly composed of a base, a grinding wheel, a motor or other power source, a bracket, a protective cover and a water feeder. The grinding wheel is set on the top surface of the base. The base has a space for accommodating the power source. The power source drives a reducer. The reducer has a transmission shaft that passes through the top surface of the base for fixing the grinding wheel. The base has a concave water collection area at the bottom position corresponding to the grinding wheel. The water collection area extends outwardly. A flow channel, the water feeder is set above one side of the grinding wheel, the water feeder has a space for holding water, and the water feeder has a water outlet on one side of the grinding wheel. The overall transmission mechanism is very streamlined and perfect, making the grinding process more convenient and smooth and improving the grinding efficiency of the overall grinding wheel machine. The grinding wheel is brittle and has a high speed. When using it, you should strictly abide by the safety operating procedures.
Precautions for the operation of grinding wheel cutting machine
1. Wear labor protection supplies before work and check whether the equipment has a qualified grounding wire.
2. Check and confirm whether the grinding wheel cutter is intact and whether the grinding wheel has cracks or defects. It is forbidden to use defective equipment and unqualified grinding wheels.
3. Do not use excessive force or sudden impact when cutting materials. Turn off the power immediately when encountering abnormal conditions.
4. The material to be cut should be clamped with a vise. One person is not allowed to support the material while the other person is cutting the material. When cutting the material, the person must stand on the side of the grinding wheel.
5. When replacing the grinding wheel, wait until the equipment stops and check and confirm the grinding wheel.
6. During operation, tools and other items are not allowed to be stored on the frame.
7. The grinding wheel cutter should be placed on a stable ground, away from flammable items, and the power cord should be connected to a leakage protection device.
8. The grinding wheel cutting disc should be installed as required, and the test start should be smooth before starting work.
9. The clamping device should be safe and reliable to prevent accidents caused by loosening of the workpiece.
10. When cutting, the operator should cut evenly and avoid the front of the cutting blade to prevent accidents caused by improper operation.
11. After work, the dust on the surface of the grinding wheel cutter should be wiped off and the workplace should be cleaned. Rain protection measures should be taken when storing in the open air.